Cabinet Panel Cooler - Nex Flow™ Frigid-X™ Cabinet Cooler
Selecting A Cabinet Panel Cooler - Nex Flow™ Frigid-X™ Cabinet Cooler:
Cabinet Panel Cooler - Nex Flow™ Frigid-X™ Cabinet Cooler come with a 5 micron filter with an automatic drain (except for the 316L stainless steel units) for the compressed air supply to insure clean, dry air and an air distribution kit to circulate the cold air inside the enclosure for even cooling.
Cabinet Panel Cooler - Nex Flow™ Frigid-X™ Cabinet Cooler are available with or without thermostat control.
When constant cooling and a constant positive purge is required we recommend the continuous operating version without the thermostat and solenoid valve. The cooling effect can be controlled by adding a regulator in line to reduce pressure for reduced cooling when it is not required and to conserve energy.
Systems utilizing a thermostat and solenoid valve saves air by activating the air conditioner only when the internal temperature reaches a critical level. The adjustable thermostat is factory set at 95°F but can be readjusted on site.
Thermostat and solenoid valve systems are recommended where the heat load can fluctuate (such as for frequency drives) and where a continual purge is not required. The thermostat and solenoid "package" can also be added at a later date to a continuous system. An Electronic Thermostat System is also available replacing the thermostat and solenoid valve with a control box to “set” the temperature (ELC System).
If mounting cannot be on the top of the control panel an optional side mount is available (except or the 316L stainless units). Cabinet Panel Cooler - Nex Flow™ Frigid-X™ Cabinet Cooler must be mounted vertical either at the top or at the side using the side mount.
